The most practical and complete solution for small and medium-sized wastewater treatment plants
Description
Characteristics
Downloads
Description
Combined Mechanical Treatment Module Hybrid is a compact module that includes all pre-treatment stages and ensures efficient extraction of waste water, sand and grease from the wastewater.
One of the advantages of the plant is the possibility of its adaptation to the characteristics of both wastewater and specific conditions of installation and operation.
The Mechanical Treatment Module is a reliable and compact equipment capable of solving many tasks:
fine mechanical treatment of wastewater;
washing and dewatering of waste water;
extraction and washing of sand;
sand dewatering and discharging;
collection and removal of floating substances, grease.
Sand trap provides automatic collection of mechanical inclusions, their washing from organic contaminants, squeezing and discharging.
How are contaminants treated and removed?
WASTEWATER: Wastewater enters the receiving chamber of the plant, where it undergoes the first stage of treatment on a fine screen. After washing and squeezing, the effluent from the grate enters the effluent discharge area.
SAND: The wastewater treated on the grate enters the tank of the horizontal sand trap. During the aeration process, the sand is washed and settled. The settled sand is transported against the water flow by a horizontal screw conveyor to the storage chamber, dewatered and discharged by an inclined screw conveyor.
FATS AND FLOATING SUBSTANCES: Floating substances and fats accumulate in the grease collection section, are removed from the water surface by the scraper mechanism of the grease trap to the discharge chamber, from where they are removed by a pump as they accumulate.
Mind technology - design and functionality:
The unit can be used both as a stage of local mechanical wastewater treatment at sewage pumping stations and as the first stage of wastewater treatment at sewage treatment plants.
Mechanical wastewater treatment module. Hybrid is a single piece of factory-ready equipment, which includes:
fine cleaning grid;
block of squeezing and washing of waste; aerated sand trap with covers;
scraper mechanism for collection and removal of floating substances;
horizontal screw conveyor for sand removal from the bottom of the tank;
inclined screw conveyor for sand discharge.
Obvious application benefits
Integration of the entire mechanical cleaning system into one housing: fine screen, aerated sand trap, grease trap, scum washing and compaction unit.
Due to the compactness of the equipment, a significant reduction in capital expenditures is achieved when constructing new or reconstructing existing treatment facilities.
Discharge of waste and sand can be realized both in containers located at each unit and in conveyors that collect sand and waste from several units and transport them to the accumulation area. This reduces the required floor space.
High efficiency of wastewater treatment. Reduction of water insoluble contaminants up to 50% of the initial volume, depending on their type.
The system of scum and sand washing prevents their rotting and formation of unpleasant odors.
The unit can be operated in both manual and automatic modes. Setting parameters and modes of operation is intuitive and easy.
Extremely adaptive functionality. The unit can be manufactured both in standard version and in special version, depending on the project requirements to the conditions of mechanical cleaning and sand removal calculations.
The design of the unit is convenient for preventive maintenance: the main working units are easily accessible for servicing
Thanks to the high level of automation, the equipment requires little or no operator attention, thus reducing operating costs.
